Wotofo

Replacement mesh coils for the Profile 1.5 RDA. Available in 3 different options. nexMESH Chill, A smooth and mellow laid back vape with great flavor and vape production. nexMESH TURBO, A bold and clear more highlighted flavor with thicker vapor production. nexMESH Extreme, Robust and with a noticeably warmer flavor and heavy vapor production. 0.15 Ohm A1 + Ni80 Clapton: An all round coil with a smooth flavor, fast ramp up and great performance at higher wattage. 0.2 Ohm Ni80+A1 Clapton: A great coil for mid to high wattage range with fast ramp up and thick vapor production. Package Contents; x10 nexMESH Coils for Profile 1.5 RDA

 The all new Profile RDTA continues the line of popular Profile rebuildable atomisers by Wotofo! In an all new incredible form factor designed for flavour chasers in mind this RDTA is simply a stunning piece of kit designed to maximise flavour output! Thanks to its incredibly versatile build deck allowing for single or dual coil builds and its bottom up juice flow design, utilising stainless steel wicks that enable upward juice transfer faster than ever to keep your coils wicked! Wotofo have mastered the RDTA and the Profile works just like an RDA with the added benefit on a huge juice tank! Features: Powerful Eliquid-up Method Automatic Eliquid Transfer Accommodating Multiple Coil Configurations With Versatile Build Deck Used with single wire coil setup, dual wire coil setup and mesh coil Compatible with all Profile RDA 1.5 meshes Powered by nexMESH technology Adopting Adjustable Side Honeycomb Air Intakes Exquisite 810 resin drip tip with bright metal decoration ring One product, two devices - Switches to an RDA easily Specification: RDTA Size: Φ25*52.7mm (without 510 pin) RDTA Capacity: 6.2ml Tube Material: PCTG Build Deck Diameter: Φ22.5mm Supported Coil Type: single mesh coil, single/dual wire coil Wattage Range: 60-80W Recommended Wattage: 70-75W Drip Tip Material & Connection Size: colored resin + metal ring, 810 sized Filling Method: mid filling / BF squonk Airflow Type: adjustable side airflow Insulator Material: German PEEK Threading: 510 thread

Battery not included. Device uses real animal hide in the leather grip. Taking a single 18650 battery (not included) and able to push up to 80w of adjustable power, the MDura is a unique take on a single battery device. The mod is super compact while still having a wide enough profile to grip and still reach the controls comfortably without having to be double jointed. The mod features the usual wattage, menu and fire controls on the front alongside a 0.96 inch TFT colour screen to display all the important vaping info. The mod is also loaded with a Nexchip by wotofo for a reliable power output and a 0.001 second firing speed. The type C port offers a reliable and fast charge when a external charger is not available and the high quality leather wrap grip of the mod gives extra comfort when in use as well as keeping the weight down.  The included Nexmini tank has a bottom adjustable airflow with a top fill. At 25mm it sits on the mod perfectly and provides a smooth direct to lung vape. Tank Features; Tank Size: 25* 32.85mm (without drip tip & 510 pin) Tank Capacity: 2ml TPD Drip Tip: 810 Delrin drip tip Filling Method: top filling Airflow Type: adjustable bottom airflow Threading: 510 thread Mod Features; Mod Dimensions:64*26*50.5mm Display: 0.96'' TFT screen Battery Type: single 18650 battery (not included) Power Range: 5W-80W Charging Port: Type-C Charging Current: DC 5V/2A Atomizer Connection: 510 connection Real Leather   Package Contents; 1x Wotofo MDura Mini Mod 1x Type C USB Cable 1x User Guide 1x nexMINI Subtank 1x D43 Clapton Mesh Coil (pre-installed) 1x D41 A1 nexMESH Coil

Battery not included. Device uses real animal hide in the leather grip. Taking a single 18650 battery (not included) and able to push up to 80w of adjustable power, the MDura is a unique take on a single battery device. The mod is super compact while still having a wide enough profile to grip and still reach the controls comfortably without having to be double jointed. The mod features the usual wattage, menu and fire controls on the front alongside a 0.96 inch TFT colour screen to display all the important vaping info. The mod is also loaded with a Nexchip by wotofo for a reliable power output and a 0.001 second firing speed. The type C port offers a reliable and fast charge when a external charger is not available and the high quality leather wrap grip of the mod gives extra comfort when in use as well as keeping the weight down.  Mod Features; Mod Dimensions:64*26*50.5mm Display: 0.96'' TFT screen Battery Type: single 18650 battery (not included) Power Range: 5W-80W Charging Port: Type-C Charging Current: DC 5V/2A Atomizer Connection: 510 connection Real Leather   Package Contents; 1x Wotofo MDura Mini Mod 1x Type C USB Cable 1x User Guide

Does not come with bubble glass. Kit will be 2ml TPD Version. Combining hardy designs with useful functions, the MDura Pro Kit has a box mod that is waterproof, dustproof and shockproof. It can withstand various out-door environments, tough enough to be dropped on hard surfaces without causing a damage. Being tough is not enough, the kit also features a tank that is capable to deliver max flavor, the nexMESH Pro! A top slide open fill, bottom airflow beast of a tank that gets some huge flavour and clouds. The MDura Pro Mod is engineered to meet the IP67 specification giving it a water resistant and dust proof feature similar to the Aegis Legend series. Powered by nexCHIP technology, the MDura Pro Mod has various safety features, including low voltage warning, PCBA temperature safety shutoff, short circuit protection, low resistance protection, and overheating protection. Other great features are the easy to use interface, six theme colours, and 0.001 seconds firing speed. Taking dual 18650 batteries, the MDura Pro box mod is able to push a maximum power of 230W under 3 wattage modes (STANDARD / POWER / POWER+). For TCR Modes, it supports Nickel, Titanium and SS coils for safe temp control vape. Features; Mod Dimensions:47.4mm*88.1mm*33.1mm Body Material: zinc alloy + rubber Display: 1.2'' TFT screen Battery Type: dual 18650 battery (not included) VW Modes: STANDARD / POWER / POWER+ Power Range: 5W-230W (VW)/ 10-230W (TC) Temperature Range: 200F—600F / 100C—315C TCR Value Range for Nickel: 400-800 (Default value: 600) TCR Value Range for Titanium: 200-500 (Default value: 350) TCR Value Range for SS: 10-300 (Default value: 105) Charging Port: Type-C Charging Current: DC 5V/2A  Atomizer Connection: 510 connection Package Contents; 1x Wotofo MDura Pro Mod 1x User Guide 1x NexMesh Pro Tank 1x H15 Mesh & Parallel Coil 0.15ohm(pre-installed) 1x H12 Clapton Mesh Coil Head 1x Accessory Bag 1x Type C Cable

Combining hardy designs with useful functions, the MDura Pro Kit has a box mod that is waterproof, dustproof and shockproof. It can withstand various out-door environments, tough enough to be dropped on hard surfaces without causing a damage. The MDura Pro Mod is engineered to meet the IP67 specification giving it a water resistant and dust proof feature similar to the Aegis Legend series. Powered by nexCHIP technology, the MDura Pro Mod has various safety features, including low voltage warning, PCBA temperature safety shutoff, short circuit protection, low resistance protection, and overheating protection. Other great features are the easy to use interface, six theme colours, and 0.001 seconds firing speed. Taking dual 18650 batteries, the MDura Pro box mod is able to push a maximum power of 230W under 3 wattage modes (STANDARD / POWER / POWER+). For TCR Modes, it supports Nickel, Titanium and SS coils for safe temp control vape. Features; Mod Dimensions:47.4mm*88.1mm*33.1mm Body Material: zinc alloy + rubber Display: 1.2'' TFT screen Battery Type: dual 18650 battery (not included) VW Modes: STANDARD / POWER / POWER+ Power Range: 5W-230W (VW)/ 10-230W (TC) Temperature Range: 200F—600F / 100C—315C TCR Value Range for Nickel: 400-800 (Default value: 600) TCR Value Range for Titanium: 200-500 (Default value: 350) TCR Value Range for SS: 10-300 (Default value: 105) Charging Port: Type-C Charging Current: DC 5V/2A  Atomizer Connection: 510 connection Package Contents; 1x Wotofo MDura Pro Mod 1x User Guide 1x Type C Cable

Want to turn your NexMesh Pro sub tank in to a single coil flavor machine RTA? well here you go folks. This awesome bit of kit comes with the base section of the Pro Tank so make sure to order the right colour! Attached to the adjustable airflow base is a very nice little two post deck that is just the right size for a nice 3mm 5 to 6 wrap Clapton coil. Under where the coil sits is a milled out airflow to give the perfect direct to lung draw straight up the chimney in to your face. This can be fine adjusted as you would expect using the bottom mounted airflow ring. Wotofo have thought this piece out well, from the simple but effective design, the ease of building, the user friendly wicking channels and the screw down chimney cap. This Piece is designed for flavor. If you are wanting to get it to building or want something that you can jump between regular screw in coil heads to hand made coils then this is a great option. For new builders we would highly recommend building on a regulated device for safety and picking up some pre wrapped coils to get you started. a 0.3ohm Clapton Coil at 35 to 50w would be perfect in this deck. Check out Youtube or pop in to your local Grey Haze or vape shop for advise and instructions.  Features; Deck and Airflow section all 1 piece Screw Down Chimney Piece Single Coil Build Deck Adjustable Airflow designed for Single Coil DTL Vaping Designed to Fit the NexMesh Pro tank only Wide Wicking Channels Two Post Design Package Contents; 1x Wotofo nexMesh Pro H17 RBA Rebuildable Deck

 Replacement 2ml Glass for the Wotofo NexMesh pro tanks Package Contents: 1x Wotofo nexMesh Pro Replacement Glass

Wotofos upgrade to the popular NexMesh tank. The Pro has a stunning looking design but keeps things simple operation wise.  Using a top fill, bottom airflow and a 24mm diameter, the Pro will look awesome on almost any mod while being easy to use and keep filled up. The Pro has a wide range of coils, one stand out coil option using mesh and parallels combo coils to give off the "best of both" experience in one go. If you are looking for full on flavor, ease of use, striking design and a well respected brand for your next tank, then look no further and add a NexMesh Pro in to your cart. Features; 2ml TPD capacity Top Fill Bottom Adjustable Airflow Sub Ohm DTL Draw 810 Drip Tip 24mm Diameter (base) 510 Connection SS construction Package Contents; 1x NexMesh Pro Tank 1x H15 Mesh & Parallel Combo Coil 1x H12 Clapton Mesh Coil 1x Accessory Bag 1x User Guide

Pack of 3 replacement coils for the Wotofo nexMesh pro Tank. H15 0.15ohm Best at 65 to 80w: A Mesh and Parallel Coil which is a combination of the double-wire parallel-winding coil and the steel mesh. The rich and delicate taste of the steel mesh and the direct taste of the double-wire parallel-winding coil heat together, giving you a totally new vape experienced. H12 0.20ohm Best at 55w to 70w: A clapton mesh wire that uses A1 and Ni80 to create a smooth flavor packed vape experience. H13 0.15ohm Best at 65 to 75w:  A strong and dense flavor with every draw, The classic nexmesh experience. H11 0.20ohm Best at 60w to 70w: A Conical mesh coil designed to produce a quick and even heated vape with a richer flavor.  

A superb stubby Mesh RTA from Wotofo that is the perfect companion to a compact single 18650 battery box mod. Or any other mod for that matter. Using a well designed build deck this RTA is designed for use with mesh coil builds but has been tweaked to take traditional single coils as well.  With a smooth top airflow the tank has a great "leak proof" performance with huge amounts of flavour thanks to the super stubby chimney. The airflow is enhanced inside the tank with the addition of honeycomb style slotting that helps produce a more intense vape.  The push open top cap makes refilling this tank simple and quick with the airflow ring located underneath to dial in the draw to your liking.  At 24.5mm diameter with a height of 27.8mm, this is a great addition to any flavour chasers collection.   Features; 24.5mm Diameter Single Coil or Mesh Coil Build Deck Top Airlfow Top Push Open Fill 510 Connection 2ml Capacity SS construction Honeycomb Airflow Package Contents; 1x Profile M RTA 1x 810 Drip Tip 1x Clapton Mesh A1+Ni80 0.15Ω 1x Classic Wotofo Mesh A1 0.18Ω 1x nexMESH A1 0.13Ω 1x User Guide 1x Accessory and Spares Bag

Coil building experience is required. These are not a drop in alternative for regular PNP coils. The Smart coil kit by wotofo is everything you need to start using your PNP coil tank as a RTA Included in the kit is coils, cotton and a PNP RBA deck and top. These can be used with the PNP pods or tanks such as the Drag X/S.   Package Contents; 1x Wotofo SMRT PnP Rebuildable Coil Kit  

The Wotofo Profile 1.5 is the upgraded version of the popular RDA. The profile has been designed to provide a stronger and richer flavor from your juice making it a flavour chasers dream RDA. The build deck uses the same concept as the old RDA with the spring loaded screw down ceramic plates to provide amazing contact, and a slight curve in the bottom for cotton placement, however this time round Wotofo have scaled everything up, to allow for the larger NexMesh coils to be fitted and providing a better vape experience. The Profile 1.5 also offers 3 different airflow configurations that can be adjusted by rotating the top cap. They have also taken squonking in to account and designed the ceramic base with ridges so the juice flows evenly to both sides of the cotton wells and provide you with the BF 510 pin. The Profile 1.5 is not compatible with the old mesh coils due to the scale up in size of the deck. Instead they have released 3 different coils, the mesh chill, the mesh turbo and the mesh extreme to fit in the RDA. Features; 24mm Diameter 510 or Squonk BF compatible Single Mesh Coil Build Deck Stainless Steel Construction 3 Airflow Options Replacement Mesh coils available HERE Package Contents; 1x Wotofo Profile 1.5 Mesh RDA 1x nexMESH Chill 0.15ohm Coil 1x nexMESH Turbo 0.13ohm Coil 1x nexMESH Extreme 0.16ohm Coil 3x Cotton Strands 2x 510 Drip Tips 1x User Guide 1x Accessory Pack

Wotofos latest in the Troll series of rebuildables. The Troll X RTA With a 24mm base diameter this RTA will fit basically any mod with ease and comes in a range of great looking colours to match your current set up. The tank is designed to be used in both singe and dual coil modes depending how you prefer to vape. The deck is spacious and well thought out with loads of room for super chunky builds and cotton.  The deck has an interchangeable airflow insert that sits under the coil with two options, either slotted or honeycomb to really dial in the draw and flavour. The adjustable airflow ring is also on the base of the tank. The slide open top fill keeps things simple and easy without having to unscrew anything to top up the tank.  Designed for flavour and huge clouds, your build skill are the only limit with this RTA.  Features; Dual or Single Coil Build  Postless Build Deck 2 airflow insert options 24mm Diameter (base) 510 Connection 2ml Capacity Bottom Adjustable Airflow Top Slide Open to Fill Direct To Lung Design Package Contents; 1x Wotofo Troll X RTA 1x Spare Glass 2x Coils 1x Cotton 1x Spare bits bag