Chargers

The new Nitecore F1 FlexBank charger is an innovative, well designed outdoor power source that is ideal for use when you are out and about. The charger is capable of charging a USB device and storing power in the battery at the same time. When the input current is not sufficient, the F1 will prioritise the charging of the external device and store surplus power in the battery.The F1 can charge a range of Li-ion batteries and is compatible with Li-ion/IMR cells: 26650, 18650, 18490, 17670, 17500, 17335, 16340 (RCR123), 14500 and 10440. The FlexBank can also receive power from an external device, such as a solar panel, through the charger's Micro USB port. In addition, it can charge external devices such as mobile phones via the 1A current Micro USB port.The F1 has an array of beneficial features including a smart multimeter which reports battery voltage, accurate to 0.1V, with blinks when a cell is installed. When in power bank mode, the indicator LEDs display the battery power and charging status in different patterns.The FlexBank automatically identifies the battery type and selects the charging current and mode accordingly. It reports battery voltage upon installation of the cell on the smart multimeter and activates over discharged batteries.**Please note: Micro USB lead is not included**  Specifications: Input: DC 5V, 500mA Size: 87.2 mm x 24 mm x 29.3 mm Weight: 30.4 g (excluding cord)

The Nitecore i8 Intelligent Charger is the latest charger from the Intellicharge Nitecore range, ideal for charging a huge variety of batteries whether used for vaping, torches or other electronic devices. Featuring 8 bays that are controlled independently, the i8 automatically detects power levels of the batteries and selects the appropriate voltage and charging mode. In addition, the charger offers reverse polarity protection and short circuit protection, ensuring you are made aware of the error with a flashing red indicator above the appropriate bay should there be a problem with one of the inserted cells. Active Current Distribution (ACD) allows the i8 to actively distribute its power among 8 slots in an orderly manner. For instance , when a battery is almost fully charged the charger will divert a portion of its current to charge other batteries. Output currents as follows: 1.5A x 2 Bay, 1A x 4 Bay, 0.75A x 4 Bay, 0.5A x 8 BayDespite offering double the bays to the Intellicharger i4, the Nitecore i8 is just as simple and easy to use. Simply insert the batteries into a bay, a red indicator will illuminate above the bay when charging is in progress and will change to green when charging is complete. No complicated menus to use as the charger does all of the work for you. The Nitecore i8 is made from flame retardant, fire resistant PC materials and has a unique grill design on the top of charger for faster heat dissipation. These features ensure the charger provides a safe, reliable and simple charging experience. Buy direct from the UK distributor to ensure you receive the genuine item with full warranty backup. Certified by RoHS, CE, FCC and CEC.Compatible with:Li-ion / IMR: 10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14350, 14430, 14500, 14650, 16500, 16340 (RCR123), 16650, 17350, 17500, 17650, 17670, 18350, 18490, 18500, 18650, 22500, 22650, 25500, 26500, 26650Ni-MH (NiCd): AA, AAA, C and D cell UK wall plug.  Specifications: Input: AC 100-240V 50/60Hz 0.6A (Max) 30W DC 12V 3A Output Voltage:Battery - 4.2V±1% / 1.48V±1%USB - 5V±5% Output Current:Battery - 1.5Ax2, 1Ax4, 0.75Ax4, 0.5Ax8USB - 5Vx2.1A Size: 117 mm wide x 101 mm deep x 134.5 mm tall / 4.61" x 3.98" x 5.30" Weight: 488.2 grams / 17.22 oz. Compatible with the followin battery chemistry / types:Li-ion / IMR: 10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14350, 14430, 14500, 14650, 16500, 16340 (RCR123), 16650, 17350, 17500, 17650, 17670, 18350, 18490, 18500, 18650, 22500, 22650, 25500, 26500, 26650Ni-MH (NiCd): AA, AAA, C and D cell Safety features include: Optimisation for IMR charging by monitoring the voltage stays within safe limits Overtime charging protection, limiting to 20 hours Made from fire retardant, flame resistant materials Automatic Intelligent Temperature Control preventing overheating

The Nitecore UM10 is an advanced USB management and charging system capable of charging a single Li-ion battery from a USB power source, while simultaneously charging an external device.Compatible with the following Li-ion / IMR cells:18650, 18490, 18350, 17670, 17500, 16340, 14500 and 10440A high definition LCD displays real time charging status, accurate to 1%.When used with a high power adapter the UM10 will charge the inserted battery plus an external device (such as a mobile phone) simultaneously. If a low power adapter is being used the UM10 has a priority switch that allows the user to select which to charge first, then automatically charging the second option when the first is complete.Data can be transferred from a computer to the external USB device, even while charging is taking place.Other features include: Intelligent CC/CV charging, reverse polarity protection and cable winder.Made from quality ABS fire retardant materials with worldwide insurance from Ping An Insurance Group. Features: • USB powered Li-ion battery charger• High definition LCD displays real time charging status• Features USB output charging• Integrated intelligent power management system• Intelligently detects input power• Intelligently distributes charging power• Priority Mode offers either battery or USB charging• Enables data transfer via USB• Features optimized charging program for IMR batteries• Intelligently selects charging current based on battery capacity• Features rear USB cable winder• Constructed from fire retardant materials• Features reverse polarity protection• Designed for optimal heat dissipation

The Nitecore UM20 is an advanced USB management and charging system capable of charging two Li-ion batteries from a USB power source, while simultaneously charging an external device.Compatible with the following Li-ion / IMR cells:18650, 18490, 18350, 17670, 17500, 16340, 14500 and 10440A high definition LCD displays real time charging status, accurate to 1%.When used with a high power adapter the UM20 will charge the inserted batteries plus an external device (such as a mobile phone) simultaneously. If a low power adapter is being used the UM20 has a priority switch that allows the user to select which to charge first, then automatically charging the second option when the first is complete.Data can be transferred from a computer to the external USB device, even while charging is taking place.Other features include: Intelligent CC/CV charging, reverse polarity protection and cable winder.Made from quality ABS fire retardant materials with worldwide insurance from Ping An Insurance Group. Features: • USB powered Li-ion battery charger• High definition LCD displays real time charging status• Features USB output charging• Integrated intelligent power management system• Intelligently detects input power• Intelligently distributes charging power• Priority Mode offers either battery or USB charging• Enables data transfer via USB• Features optimized charging program for IMR batteries• Intelligently selects charging current based on battery capacity• Features rear USB cable winder• Constructed from fire retardant materials• Features reverse polarity protection• Designed for optimal heat dissipation

The Nitecore SC2 Charger has a total output of 5A and can charge a battery at up to 3A current in a single slot, meaning it only needs 1.5 hours to completely charge a 3000mAh Lithium battery. The charger can intelligently select the most appropriate charging current based on the automatic battery capacity detection, however the current can also be selected manually from 3, 2, 1 and 0.5A. The SC2 features reverse polarity protection, short circuit prevention and can detect non-rechargeable batteries. With extremely low internal resistance, IMR batteries may be overcharged and lead to safety issues when charged in regular Li-ion battery chargers. To address this problem, the SC2 incorporates an optimised IMR charging system that is able to monitor the entire charging process, ensuring the voltage is always within safe limits, which ultimately helps extend battery life. Another unique feature of the SC2 is the ability to restore IMR cells. Upon insertion of an OV IMR battery, all eight LEDs on the SC2 will blink to indicate it is not ready for charging. By pressing and holding the button over the slot in question the charger will enter recover mode. Should the battery fail to recover after several attempts we recommend the battery is disposed of. Other features include reverse polarity protection and short circuit prevention, USB output and overtime charging protection.The SC2 is compatible with the following Li-ion/IMR/LiFePO4 batteries: 10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14350, 14430, 14500, 14650, 16500, 16340 (RCR123), 16650, 17350, 17500, 17650, 17670, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22500, 22650, 25500, 26500, 26650. Plus NiMh/NiCd: AA, AAA, AAAA, C, D.   Specifications: Input: AC 100~240V 50/60Hz 0.9A (Max) 30W           DC 12V 2.5A Output: 4.35V±1% / 4.2V±1%              3.7V±1% / 1.48V±1%              3A+2A MAX              USB:5V, 2.1A

  The Nitecore range of chargers are some of the best and safest around, build to a high standard with safety in mind Nitecore brings there ethic and quality to the new blazing fast Q2 quick charger! Capable of charging at 2000mah in a single slot in will have your batteries read in no time. Specifications: Input: DC 12V 1000mA | 12W Output: 4.2V±1% | 2A*1, | 1A*2 Compatible with: Li-ion / IMR: 10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14350, 14430, 14500, 14650, 16500, 1634(RCR123), 16650, 17350, 17500, 17650, 17670, 17700, 18350, 18490, 18500, 18650, 18700, 22500, 22650, 25500, 26650, 26700, 20700, 21700, 22700 Features: Automatic Deactivation upon charging completion Has reverse polarity and short circuit prevention features to avoid damaging your battery and charger Made from PC materials that are fire resistant Two charging bays that can charge 2 Lithium Ion batteries simultaneously Charging Status Indicator will show you if your battery is charging or is fully charged Two charging modes: Constant Current and Constant Voltage Compatible with car adapters making it one of the best options for traveling and camping Dimensions:Length - 4.94" (125.4 mm)Width - 2.35" (59.6 mm)Height - 1.43" (36.2 mm)Weight: 3.25 oz (92 g) Package included: 1x Nitecore Q2 2A Multicolor Quick Charger 1x AC Power adapter

The Nitecore V2 In-Car Speedy Charger features two slots, compatible with a range of batteries including 18650 and 16340 cells. The total charging current is up to 6A, with 3A in each slot.The V2 has a cup shaped design so that it perfectly fits in your car cup holder, to ensure it is secure when driving. The charger features two USB ports to charge your electronic devices, such as phones and tablets. The maximum output of each USB port is 5V and 2.1A.Upon insertion, the built-in micro processor will automatically identify the battery type and select the appropriate charging mode. In addition, when a 0V IMR battery is inserted all 3 green LEDs over the slot will blink together. Simply press and hold the function switch to enter recovery mode.The V2 is compatible with the following: Li-ion/IMR cells: 14500, 14650, 16500, 16340 (RCR123), 16650, 17350, 17500, 17650, 17670, 18350, 18490, 18500, 18650, 22500, 22650, 25500, 26500, 26650 Unprotected batteries: 17700, 18700, 20700, 21700, 22700, 26700 NiMH (NiCd): AA, C Package contents: 1x Nitecore Intellicharger V2 1x USB Cable 1x Power Cord 1x User Manual

 The Nitecore range of chargers are some of the best and safest around, build to a high standard with safety in mind Nitecore brings there ethic and quality to the new blazing fast UM4 quick charger! Capable of charging at 1500mA in a single slot in will have your batteries read in no time. Specifications: Input: DC 12V 2000mA 24W Output: 4.35V±1% | 1500mA*4, 1500mA*2 Compatible with: Li-ion / IMR: 10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14350, 14430, 14500, 14650, 16500, 16340 (RCR123), 16650, 17350, 17500, 17650, 17670, 17700, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22500, 22650, 22700, 25500, 26500, 26650, 26700Features: Can charge 4 x Li-Ion batteries independently at the same time Uses two charging modes: Constant Current and Constant Voltage Detects battery power level and will choose the correct voltage and charging mode necessary Automatic shut-off once the battery is charged RoHS, CE, FCC, and CEC Certified Overcharging, reverse polarity, and short circuit prevention to fully protect your batteries while charging Constructed of fireproof materials that can prevent accidental fires LED charging indicators Compatible with car chargers making charging on the go a capability   Dimensions: 125.48mm x 95.5mm x 36.32mm(length x width x height) Weight: 5.3 oz (150.3 g) Package contents: 1x Nitecore UM4 1500mA Quick Charger 1x AC Power adapter

The Nitecore range of chargers are some of the best and safest around, build to a high standard with safety in mind Nitecore brings there ethic and quality to the new blazing fast UMS2 quick charger! Capable of charging at 3Amps in a single slot in will have your batteries read in no time. Also now featuring an energy-efficient LCD display for real-time charging information. Specifications: Input: DC 5V/2A  9V/2A Output: 4.35V±1% / 4.2V±1%  -  3.7V±1% / 1.48V±1% Compatible with: Li-ion / IMR: 10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14350, 14430, 14500, 14650, 16500, 16340 (RCR123), 16650, 17350, 17500, 17650, 17670, 17700, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22500, 22650, 22700, 25500, 26500, 26650, 26700  Ni-MH/Ni-Cd: AA, AAA, AAAA, C ,DFeatures: Can charge 4 x Li-Ion batteries independently at the same time Uses two charging modes: Constant Current and Constant Voltage Detects battery power level and will choose the correct voltage and charging mode necessary Automatic shut-off once the battery is charged RoHS, CE, FCC, and CEC Certified Overcharging, reverse polarity, and short circuit prevention to fully protect your batteries while charging Constructed of fireproof materials that can prevent accidental fires LED charging indicators Compatible with car chargers making charging on the go a capability   Package contents: 1x Nitecore UMS2 3Amp Quick Charger 1x AC Power adapter